PRODUCT

Home page

PRODUCT DETAILS

Square Shaft Screw Piles are engineered foundation solutions designed to provide exceptional stability and load-bearing capacity for various construction projects. Featuring a square shaft with helical threads, these piles ensure precise installation, even load distribution, and enhanced structural integrity. Manufactured from high-quality galvanized steel, Square Shaft Screw Piles offer excellent corrosion resistance, long service life, and minimal maintenance requirements. Their modular design allows flexible length and diameter customization to meet specific project needs, making them suitable for residential buildings, commercial structures, industrial facilities, bridges, and solar panel foundations. Quick and efficient installation reduces labor costs and environmental disruption, while their adaptability to different soil types, including clay, sand, and gravel, ensures reliable performance in diverse conditions.

screw piles are a popular and effective foundation solution that offer several benefits over traditional foundation methods. Firstly, they can be installed quickly and with minimal disturbance to the surrounding area, making them ideal for use in areas with limited space or where there are existing structures. screw piles also provide superior support and stability, as they are designed to distribute the weight of the structure evenly across the soil. This means that they can be used to support a wide range of structures, including residential, commercial, and industrial buildings. Additionally, screw piles are resistant to the effects of moisture and environmental factors, making them a durable and reliable solution that can last for decades with little maintenance. Overall, the use of screw piles can provide significant benefits in terms of cost, efficiency, and performance, making them a popular choice for many construction projects. screw piles have many benefits that make them competitive against other deep foundation technologies! Here are some of the few reasons screw piles stand out.

Size: screw piles use a much smaller working footprint then Caisson or Auger piles. They can be installed in tighter areas using smaller drill rigs and take up less storage on job sites.

Speed: screw piles can be installed much faster than other deep foundation technologies. Between Larger equipment, curing time, weather delays, etc. The Helical Pier goes into the ground with no delay. At a rate of 15 rpm’s and an advancement of 3” per revolution, a typical 30’ section can be completed in about 10 minutes!

Cost: screw piles take much less time to install than other deep foundation Technologies. They can also be loaded immediately after install, compared to other technologies that may need to be curated and tested before moving on to the next step in your plan.

Vibration and Noise: screw piles produce little to no vibration during installation. This minimizes the chance of possible damage to existing structures from the movement of soil. Vibration and noise can disturb surrounding areas/buildings and the people in them. screw piles can prevent disturbance and even damage to surrounding areas.

Our piers can custom manufacture helical piles up to 24” in diameter with a .875 wall and up to a 42” helix to suit your specified material requirements and standards.

All the sizes can be customized.

Applications

Power Transmission Infrastructure‌

Widely used as foundations for high-voltage transmission towers due to their exceptional load-bearing capacity and resistance to lateral forces. The helical design enhances soil friction, ensuring stability in diverse geological conditions

Renewable Energy Projects‌

Essential for solar panel installations (ground-mounted and rooftop systems), providing rapid deployment and corrosion resistance. Hot-dip galvanized variants withstand harsh outdoor environments

Construction Engineering

Temporary support: Used in excavation shoring and trench stabilization.

Permanent foundations: Employed in lightweight structures like greenhouses, signage, and fencing

Specialized Applications‌

Composite soil reinforcement: Combined with CFG (Cement Fly-ash Gravel) piles to improve soft soil strength

Disaster-resistant designs: Patented models incorporate anti-settlement features with T-shaped anchors for flood-prone areas

Advantages Summary‌:

Minimal vibration during installation (ideal for urban areas).

Reusable and adjustable for temporary projects.

Cost-effective compared to traditional concrete foundations

Round Shaft Helical Pile & Extension

Shaft material: Seamless high tensile pipe, conforms to ASTM A500 Grade B/C or other customized meterial

Helical material: ASTM A36 Hot rolled plate

Corrosion protection conform to ASTM A123 standard for Hot-Dipped Galvanized coating

Leading edge of Helices beveled 45 degrees

Greater section modulus strength to resist twisting and deflection

Greater load capacities

Specifications
Shaft Size (inch)	Wall Thick(inch)	Helix Thick(inch)	Lead Length(ft)	Helix Size(inch)	Extension Length (ft)
2.875 OD.	0.203, 0.217, 0.25, 0.262, 0.276	3/8, 1/2, etc	3.5, 5, 7, 10	8, 10, 12, 14	3.5, 5, 7, 10
3.00 OD.	0.217, 0.238, 0.254, 0.276	3/8, 1/2, etc	3.5, 5, 7, 10	8, 10, 12, 14	3.5, 5, 7, 10
3.50 OD.	0.254, 0.276, 0.300	3/8, 1/2, etc	3.5, 5, 7, 10	8, 10, 12, 14, 16	3.5, 5, 7, 10
4.00 OD.	0.315	3/8, 1/2, etc	3.5, 5, 7, 10	10, 12, 14, 16	3.5, 5, 7, 10
4.50 OD.	0.237, 0.2622, 0.290, 0.337	3/8, 1/2, etc	3.5, 5, 7, 10	10, 12, 14, 16	3.5, 5, 7, 10
5.50 OD.	0.258, 0.361	3/8, 1/2, etc	3.5, 5, 7, 10	10, 12, 14, 16	3.5, 5, 7, 10
6.625 OD.	0.562	3/8, 1/2, etc	3.5, 5, 7, 10	10, 12, 14, 16	3.5, 5, 7, 10

Square Bar Shaft Helical Pile & Extension

Square Solid Bar Helical pile also called Square Solid Bar Piling, Square Bar Helical Anchor, Square Shaft Helical piles etc.

Bar Material: ASTM 5140 or ASTM 1045 steel, round corner 5mm radius

Helix Plate material conforms to ASTM A36 hot rolled plate

Helix thickness are available in 3/8" and 1/2"

All helix leading edges sharpened and rock cut and 45 degrees

Corrosion protection to conform to ASTM A123 standard for Hot-Dipped Galvanized

A better conventional solid steel with extra-high strength

Specifications
Shaft Size(inch)	Lead Length(ft)	Helix Size(inch)	Helix Thickness(inch)	Extension Length(ft)
1 1/2	3,5,7,10	8,10,12,14	3/8 or 1/2	3,5,7,10
1 3/4	3,5,7,10	8,10,12,14	3/8 or 1/2	3,5,7,10
2	3,5,7,10	8,10,12,14	3/8 or 1/2	3,5,7,10

Avoid heat damage on shaft caused by upset coulping process

FACTORY

APPLICATION AREAS

FAQ

How many countries have you exported? do you have service there?

We have exported to more than 75 countries. Please contact us to get the local service.Moreover, as we progress, we are confident that we can achieve even greater accomplishments.

Could we be your agent in our country?

Yes, we are looking for worldwide agents now.We too wish to join hands in pursuing mutual development, thereby achieving a synergistic effect where the whole is greater than the sum of its parts.

What certificates do you have?

We have certificates of CE,ISO9001 .

Where is your company? Where is the loading port?

Our company is situated in Tai'an City, Shandong Province. The nearest ports to us are Qingdao Port and Tianjin Port, both of which can be reached within the same day.

Are you manufacturer?

Yes, we are a manufacturing facility specialising in the production of steel pipes, screw piles and similar products, employing processes such as welding, stamping and cutting.

Screw piles